DLI Training

Remove Non-Friable Asbestos (Class B) Course in Sydney

SafeWork NSW states that a non-friable asbestos removal licence is required to remove more than 10sqm of non-friable asbestos.

This unit is required for all Asbestos Containing Material (ACM) removal workers engaged in the removal of non-friable ACM in quantities more than 10m2.

Project sites for removal of non-friable asbestos include construction sites, ships and soils.

The model work health and safety (WHS) regulations and the Code of Practice: How to safely remove asbestos (2018) requires workers to hold certification for the class of licensed asbestos removal work they will be undertaking. Completion of this unit of competency is certification to undertake non-friable (Class B) removal work.

Occupational licenses are required nationally. This unit is required for all ACM removal workers engaged in the removal of more than ten square metres of non-friable ACM.

Completing this training does not result in getting the relevant asbestos licence. Workers need to meet Safework NSW requirement to apply for the licence.

SafeWork NSW Approved (RTO 800483)

CPCCDE3014 Remove Non-Friable Asbestos

This unit of competency specifies the outcomes required to remove non-friable asbestos containing material (ACM). It includes preparing, containing and removing non-friable ACM, and knowledge of decontamination and disposal requirements.

Site location can be a real workplace or simulated environment that may include domestic or commercial premises, a demolition site, a new worksite or an existing structure being renovated, extended, restored or maintained.  Project sites for removal of non-friable asbestos include construction sites, ships and soils.

The model work health and safety (WHS) regulations and the Code of Practice: How to safely remove asbestos (2018) requires workers to hold certification for the class of licensed asbestos removal work they will be undertaking. Completion of this unit of competency is certification to undertake non-friable (Class B) removal work.

Occupational licenses are required nationally. This unit is required for all ACM removal workers engaged in the removal of more than ten square metres of non-friable ACM.

Candidates are advised to consult with the relevant state and territory regulatory authorities to confirm specific jurisdictional licensing requirements to remove non-friable ACM.

Pre-Requisite Units of Competency

The following units of competency must be completed prior to commencing CPCCDE3014 Remove non-friable asbestos

  • CPCCWHS1001 Prepare to work safely in the construction industry (white card).

For course dates and booking please call  1300 354 876

By completing this course participants will gain the skills and knowledge to:

  • Prepare for asbestos removal.
  • Prepare asbestos removal site.
  • Set up asbestos work area.
  • Remove non-friable asbestos.
  • Carry out decontamination process.
  • Clean up work area
  • Minimum 18 years of age
  • Level 2 LLN minimum (refer to Language Literacy Numeracy Chart)
  • 100 points of ID must be provided on the day of training (Original)
  • A statement of attainment for CPCCWHS1001 – Prepare to work safely in the construction industry or SafeWork general construction induction training card (White Card)
  • A Statement of Attainment for CPCCDE3014 Remove non-friable asbestos
  • Have a USI or create one from: https://www.usi.gov.au/students/Digital-ID
  • Training will be conducted face to face for 2 days at DLI Training.
  • Training schedule conducted on client site will be negotiated with employer based on employee release availability for 16 hours total duration.
  • DLI Training: 5 Melissa Street Auburn NSW.
  • Client site: workplace training available on request (minimum 7 participants).

Students will be assessed using relevant assessment methods which includes but is not limited to the following:

  • Knowledge evidence requires student to answer a range of theory questions.
  • Performance evidence includes undertaking two separate non-friable asbestos removal and disposal tasks.

Upon successful completion of the course, students will be issued with Statement of Attainment for CPCCDE3014 Remove non-friable asbestos and issued a wallet sized card reflecting their achievement.

Clock Icon
DURATION

2 Days

Chat Icon

DELIVERY

Face to Face

Achievement icon

CERTIFICATION

Statement of Attainment

Remove Non-Friable Asbestos (Class B) Course in Sydney

WHY CHOOSE US?

checklist icon
AUTHORISED TRAINING ACADEMY

Our Training Organisation is approved by The Australian Skills Quality Authority (ASQA)

Achievement icon
EXPERT & PROFESSIONAL TRAINERS

Our Trainers are experienced and qualified in the area of the training and hold years of industry experience

Building icon
MODERN CLASSROOMS

Providing our students with the best training experience in a new learning environment

3 STEP PLAN

Increase your opportunity and reach your goals in 3 simple steps.
Our training is designed to improve your skills and knowledge in an
easy to understand learning format.

STEP 1

Select the course or qualification you would like to complete and review the course details.

STEP 2

Confirm the training schedule or speak to our team to answer any questions you may have before making your payment.

STEP 3

Download the Pre-Training Guide and get ready to upgrade your ability with our expert trainers by your side.